EddieNewYork’s Blog

Before throwing anything away, I always look for things I can reuse elsewhere.  In this case, an LED from a broken computer power supply.  Perfect for adding a neutral light indicator on my 50 and it was green too.  =)   If you do this mod, don’t forget to add a resistor, otherwise you will burn out the LED.

Neutral indicator lights work on horizontal motors by supplying a ground connection.  Click here and scroll about half way down the page to see where this connection terminates on the motor.  This green/white wire connects to the black negative wire on the LED and the red positive wire taps into your 12v yellow  power wire assuming you’re going directly to the LED.

Tags: Lights

This entry was posted on Monday, March 1st, 2010 at 12:38 am and is filed under Honda CRF50. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.